eng Oriental Scientific Publishing Company Material Science Research India 0973-3469 2011-05-23 8 1 24 31 2462 article Effect of Friction Stir Welding Processing Parameters on Abrasion Wear Resistance of AA5083 Welded Joints O. Badran 1 N. Al-Kloub 2 A. Mahmood Hassan 2 J. Abdullah Al-Jarrah 3 S. Khaled Khrais 4 Dean's Assistant for Scientific Research and Graduate Studies, Faculty of Engineering Technology, Al-Balqa Applied University, PO. Box 330116, Amman - 111 34, Jordan. Al-Balqa` Applied University, Faculty of Engineering Technology, Amman, Jordan. Jordan University of Science and Technology, Industrial Engineering Department, Irbid, Jordan. Al-Balqa` Applied University, Al-Hosun College, Irbid, Jordan.

The effect of processing parameters an abrasion wear resistance of AA5083 joints produced by FSW was analyzed in this study. Welding speed and rotational speed were the considered parameters studied in this investigation at five levels for each one. The result of this study showed that the abrasion wear resistance of the stir zone increased with increasing welding speed and it increased with decreasing rotational speed. And that welding speed is more significant than rotational speed. Also, the interaction effect of welding speed and rotational speed is not significant.

 https://www.materialsciencejournal.org/vol8no1/effect-of-friction-stir-welding-processing-parameters-on-abrasion-wear-resistance-of-aa5083-welded-joints/ Abrasion wear resistance Friction Stir welding processing