Volume 8, Number 2
Study of Process Parameters in Reduction from Doped Tungsten Blue Oxide to Non-Sag Tungsten Powder
Introduction Tungsten has the highest melting point and lowest vapour [...]
Resistivity Measurement of Teflon Doped With Sodium and Lithium
Introduction Nowadays, considerable amount of work is being carried out [...]
Depth Profiling of Aluminium Diffused in Silicon by Activation Analysis With 14 Mev Neutrons
Introduction Diffusion of silicon with Aluminium is normally carried out [...]
The Corrosion Protection of Materials by Nanotechnology
Introduction Corrosion of materials is burning problems for industry, railways, [...]
Theoretical Approach to Laser Induced Cleavage Mechanoluminescence in Luminophors
Introduction Mechanoluminescence (ML) can be excited by cutting cleaving. grinding [...]
Variation of Flux and Energy of 14 Mev Neutrons With Variation of Matrix Around A Sample
Introduction The 14 MeV neutron generator1 used for the present [...]
On Some Considerations on Heating Rate in Thermoluminescence Measurements
Introduction Thermoluminescence (TL) is a luminescence phenomenon of a semiconductor [...]
Biosensors: The Future of Chemical Diagnostics
Introduction The development of biological sensors, or biosensors, is a [...]
Effect of Sintering Temperature on the Properties and Microstructure of A Ceramic Product
Introduction Clay was one of the earliest materials used to [...]
Structural and Low Temperature Electrical Properties of A Nickel/Iron Multilayer
Introduction In the recent past the structural and electrical studies [...]
Microstructural Characterisation of SAF 2205 Duplex Stainless Steel Heat – Treated At 1300?C
Introduction The Duplex stainless steels (DSS) have two-phase microstructure of [...]
Morphology and Corrosion Study of Electroless Ni-P Coatings on Commercial Aluminium Alloy
Introduction The term “electroless process” is used to describe methods [...]
Vibrational Spectroscopic Investigations of Methacrylonitrile
Introduction Methacrylonitrile is an aliphatic nitrile used extensively in the [...]
An Experimental Study for Identification of Suitable Low Cost Alternative Flux Material in Manufacturing of Red Body Ceramic Glazed Tiles: A Model Study
Introduction Now a days ceramic tile has become a common [...]
Acid Activation and Its Characterisation of Gulbarga City Bentonite Clay
Introduction Clays commonly refer to either rocks that may consolidate [...]
Effect of SHI Irradiation on CO2 Gas Response of Zno Thick Films
Introduction Carbon dioxide is one of the most frequently found [...]
Effect of the Intensity of The Acid Rain on the Geotechnical Properties of Soils of Diferent Plasticity
Introduction Environmental Geo-technology is emerging as an interdisciplinary science, aiming [...]
Plume Generated by Oil Depot Fire and Associated AOD Changes
Introduction The interaction of aerosol particles with the radiation is [...]
Software for Computing Properties of Composite Materials from Sawdust/Palm Kernel Shell
Introduction Materials research and development (R&D) has shifted from monolithic [...]
Numerical Investigation for the Effects of Shaft Misalignments on Natural Frequencies of Steel Shafts
Introduction The goal of alignment technique is meet the standards. [...]
Study of Fourier Descriptors and It’s Laplace Transform for Image Recognition
Introduction A supervised learning process of artificial neural networks is [...]
The Corrosion Behavior Studies of Cold Rolled Austenitic Stainless Steel
Introduction The austenitic stainless steels 300 series and their properties [...]
Production of Automobile Brake Pad Using Cow Bone as Base Material
Introduction Brake pads are a component of disc brakes used [...]
Effects of Surface Area on the Electrical Properties of Tellurium Thin Films
Introduction Tellurium is a semiconducting element with very wide application [...]
Systematic Analysis of Rotational Bands for Medium and Heavy Nuclei
Introduction The variable moment of inertia with softness (VMI) model1,2 [...]
Effects of Geometrical Cross- Section on Fatigue Strength of Aluminum Alloy (6063)
Introduction Parts of machines are often exposed to varying stress, [...]
