Properties of Pulsed Electrodeposited Cdse Thin Film on Fluorine Tin–Oxide (Fto) Coated Glass Using Aqueous Bath

Abstract
Keywords
Introduction
Materials and Methods
Results
Discussion
Conclusion
Acknowledgement
Funding Sources
Conflict of Interest
Data Availability Statement
Ethics Statement
References

Article | Open Access

Properties of Pulsed Electrodeposited Cdse Thin Film on Fluorine Tin–Oxide (Fto) Coated Glass Using Aqueous Bath

Volume 6, Number 2

Prakash D. Mapari¹, S.V. Dhanwate², V.G. Wagh³ and S.S. Kale³

¹Bhujbal Knowledge City, MET?s Institute of Engineering, Adgaon, Nashik - 422 003 (India).

²Swami Muktanand College of Science Yeola, Nashik - 423 401 (India).

³K. T. H . M College, Nashik - 422 002 (India).

DOI : http://dx.doi.org/10.13005/msri/060229

Download this article as:

ABSTRACT:

Thin films of CdSe were deposited by electrodeposition technique on substrate of fluorine tin–oxide (FTO) coated glass using aqueous bath solution containing 0.02 M CdSO4 (10 mL) + 0.2 M EDTA (1 mL) + 0.010 M SeO2 (10 mL) at 750C temperature. The preparative parameters were optimized to get good quality CdSe thin films. These films were characterized by X-ray diffraction (XRD), optical absorption and photoelectrochemical (PEC) techniques. The XRD analysis of the deposited film showed presence of polycrystalline in nature with hexagonal structure. The surface morphology studies by scanning electron microscope ( SEM ) shows that the deposited film are well adherent and grains are uniformly distributed over the surface of substrate.

KEYWORDS:

Electrodeposition; XRD; CdSe thin films; SEM; Fluorine tin oxide

Article Metrics